At the 2017 IADC/SPE Drilling Conference and Exhibition in The Hague, Baker Hughes released the TerrAdapt drillbit, a new self-adjusting polycrystalline diamond compact bit design.
On conventional bits a fixed depth-of-cut (DOC) control setting is optimized for a single rock type. When the bit moves from one formation to another, stick/slip is likely to occur.
Of course, drillers and operators know what happens to the ROP when stick/slip happens. Drilling costs are increased when ROP decreases. The bit and other mechanical and electrical bottomhole assembly hardware can be damaged.
Baker Hughes explained at a press event held in March that DOC control for the TerraAdapt drillbit is achieved through a passive hydromechanical feedback mechanism encapsulated in self-contained cartridges installed inside the bit blades. The DOC control elements mounted on the cartridges respond to the external loads through rate-sensitive retraction and rapid extension strokes that were strategically designed.
Baker Hughes had an internal innovation contest called the Wildcat Challenge. The idea for the selfadjusting bit won. The team was given 12 months to move it from a concept to a proven solution. In 2015 formal development efforts began. As Scott Schmidt, vice president of drillbits for Baker Hughes, said, “It has been exciting to take such a novel idea from concept to commercial offering in less than three years.”
The TerrAdapt bit automatically changes its aggressiveness based on the formation through which it is drilling to mitigate vibration, stick/slip and impact loading. The initial release of the bit focuses on 8½-in. to 12¼-in. versions.
In a Delaware Basin well one operator’s ROP through interbedded formations was increased by 27% compared to the average ROP in offset wells. The bit reduced torque variations by 90%.
The industry continues to improve its effectiveness and efficiency through innovation. This is one example of efforts by service companies to provide operators with new solutions even in a downturn. Lowering costs through new ideas to maximize operations is what will keep oil fl owing even at $50/bbl.
The message is that the industry is not done innovating. Drillbits have been around for a long time, but there are still lots of opportunities for coloring outside the lines, as there are in every area of the oil industry.
Recommended Reading
Dividends Declared in the Week of May 6
2024-05-10 - Here is a selection of upstream, midstream and service and supply companies’ dividends declared in the past week.
Permian M&A: Oxy Shops Delaware Assets, Family Oil Cos. Stand Out
2024-05-10 - As operators scour the Permian Basin for M&A opportunities, they’re keeping an eye on a tepid divestiture market. Family-owned oil companies also stand out among the pack of private inventory holders remaining in the Permian, according to Enverus Intelligence Research.
GeoPark, Vitol Sign Offtake Deal for Llanos 34 Block
2024-05-10 - Under the agreement, GeoPark will sell and deliver to Vitol a minimum of 20,000 bbl/d of oil from the Llanos 34 Block in Colombia, which GeoPark holds 45% working interest.
Enbridge Plans to Increase Permian Oil Pipeline’s Capacity
2024-05-10 - Midstream company Enbridge announced an open season on the Gray Oak Pipeline for a proposed 120,000 bbl/d expansion and updated its M&A efforts.
Energy Transition in Motion (Week of May 10, 2024)
2024-05-10 - Here is a look at some of this week’s renewable energy news, including $1.5 billion in investment commitments for low-carbon energy initiatives.